Even the best iPhone parts can arrive dead if they are not packed for static safety. Flex cables, camera modules, and batteries are all sensitive to electrostatic discharge during transit — especially through dry air cargo holds. Buyers should know what proper packaging looks like so they can hold suppliers accountable.
The minimum acceptable packaging
- Anti-static bubble bags for screens and flex cables — pink or metallic shielding
- Conductive foam inserts for camera modules and IC-sensitive boards
- ESD-safe foam slots so parts do not rub against each other
- Moisture barrier bags for batteries, sealed with a humidity indicator
What each part needs
| Part | Packaging requirement |
|---|---|
| Screens | Anti-static bag + corner protectors + rigid carton |
| Flex cables | Anti-static bag on a backing card; never loose in a padded envelope |
| Camera modules | Conductive foam tray with individual cells |
| Batteries | UN38.3 compliant + moisture barrier + foam separation |
| Small mechanical parts | Ziplock in anti-static pouch inside a small box |
What bad packaging costs you
A flex cable that rubs against a battery terminal in transit can short. A camera module loose in a bag can have its OIS magnet knocked out of alignment. A screen shipped in a padded envelope without corner protection often arrives with a cracked corner. The cost of bad packaging is usually higher than the cost of good packaging.
Supplier check
Before placing a large order, ask your supplier for photos of their packing station. At ScrnFix, every flex cable, camera module, and battery ships in ESD-safe packaging with material traceability.
FAQ
Is pink bubble wrap ESD safe? Pink dissipative bubble wrap is acceptable for low-sensitivity parts; metallic shielding bags are better for IC-heavy items like cameras.
Can I reuse anti-static bags? Yes, as long as they are intact. A torn bag loses its protective properties.